Features of automatic capsule filling machine

Automatic capsule filling machine features:

Automatic capsule filling machine equipment small size, low energy consumption, simple replacement of touch, easy to operate, easy to clean;
The standardization and serialization of automatic capsule filling machine: the manufacturing parts can be universally interchangeable, and the replacement of the touch is convenient and accurate.
The automatic capsule filling machine uses a high-precision classifier, the vibration is small, the extreme movement noise is less than 70dB, the dose difference is controlled within ± 3%, and the probability of the domestic capsule is higher than 99.5%;
The automatic capsule filling electromechanical gas components are made of well-known brands such as Siemens of Germany and Omron of Japan, and the control system is safe and reliable.
5. The automatic capsule filling machine platform adopts hard chromium plating on the surface of 45≠ flat plate, which is not easy to deform, prevent rust and improve hardness; The parts that are in direct contact with the powder are made of 304, 316 high-quality stainless steel, which fully meets the requirements of the GMP specification of the pharmaceutical factory.
Full automatic capsule filling machine can configure powder collector according to user needs, can effectively directly recover the lost materials 85%-90%, improve the economic benefits of drug manufacturing enterprises.

The automatic capsule filling machine is fully functional, the hopper has no feedstock buzzer alarm, the empty bag is not enough to automatically stop, and the filling function of pellets, particles and tablets can be installed according to user requirements, to meet the needs of 3 kinds of materials, to meet the needs of slow release, controlled release and tablet drugs in the same capsule.

Automatic capsule filling machine metering disc bottom embedded sealing device, improve powder leakage situation, reduce machine wear, more convenient to clean, the dose disc is equipped with a barrier around the plate, very effectively the dose disc under the plane thrown out of the powder through the pipeline recovery and reuse, while reducing the table surface dust.

⒐ automatic capsule filling machine to avoid cross contamination and energy saving: redesigned the capsule product discharge mechanism, eliminating the air compressor, thereby reducing the overall size and noise of the machine, avoiding cross contamination and motion failure caused by air discharge, and achieved remarkable energy saving effect;

⒑ The automatic capsule filling machine is convenient to adjust the gap of the dosing disk, only need to adjust the Angle of the gear core shaft, which can drive the transmission gear and make the 5 support bolts rise or fall at the same time; In view of the different characteristics of Chinese and Western medicine, the operation pressure required by filling is larger, increase the size of the CAM, use nitrogen flower treatment on the CAM surface, increase the surface hardness, and ensure the service life and operation reliability of the equipment (the CAM is the only domestic enterprise that uses five-dimensional processing equipment imported from Germany for processing);

⒒ Manually adjust to knob type fine-tuning mechanism, easy to adjust, disassemble and clean. The bottom of the measuring tray is embedded with imported sealing device, which improves the powder leakage situation. The lower bracket is the only one in China that adopts imported aviation aluminum passivation treatment, does not produce static electricity, does not stick powder, and is easy to clean;

⒓ Improve the structure of the powder scraper: change the traditional flat Angle powder scraper, so that the loading capacity of each station of the measuring tray is consistent with other holes, and improve the loading accuracy of powder; ⒔ man-machine interface configuration intelligent module adopts the German original Siemens software, complete monitoring functions, for the lack of materials, lack of bags, material channel obstruction and mechanical failure and other operating faults to achieve automatic diagnosis, monitoring, automatic alarm and stop. Statistical preparation of production date, production time, real-time per grain measurement and cumulative yield is correct.